Specifications TP-Link TL-SG3452P

Features	Specifications
Product Type	JetStream 52-Port Gigabit L2+ Managed Switch with 48-Port PoE+
Network Ports	48 × 10/100/1000 Mbps RJ45 Ports
SFP Ports	4 × Gigabit SFP Slots
Console Ports	1 × RJ45 Console Port + 1 × Micro-USB Console Port
PoE Ports	48 × Gigabit PoE+ RJ45 Ports
PoE Standard	IEEE 802.3af/at
PoE Power Budget	384W total
Maximum PoE Power	Up to 30W per port
Switching Capacity	104 Gbps
Packet Forwarding Rate	77.4 Mpps
MAC Address Table	16K
Packet Buffer	12 Mbit
Jumbo Frame	9 KB

Layer 2 & Layer 3 Features

Features	Specifications
VLAN	802.1Q VLAN, MAC VLAN, Protocol VLAN, Voice VLAN and Private VLAN
Link Aggregation	Static Link Aggregation and 802.3ad LACP; up to 8 groups with up to 8 ports per group
Spanning Tree	802.1D STP, 802.1w RSTP and 802.1s MSTP
STP Security	TC Protect, BPDU Filter, BPDU Protect, Root Protect and Loop Protect
Loopback Detection	Port-based and VLAN-based
Port Mirroring	One-to-One, Many-to-One, Tx/Rx/Both
Flow Control	IEEE 802.3x Flow Control
IGMP Snooping	IGMP v1/v2/v3 Snooping, Fast Leave, IGMP Snooping Querier and IGMP Authentication
MLD Snooping	MLD v1/v2 Snooping
IP Interfaces	16 IPv4/IPv6 Interfaces
Static Routing	48 IPv4/IPv6 Static Routes
Static ARP	128 Static ARP Entries
ARP Entries	316 Entries
DHCP	DHCP Server, DHCP Relay and DHCP L2 Relay
Proxy ARP	Supported
Gratuitous ARP	Supported

Security & QoS

Features	Specifications
ACL	L2/L3/L4 ACL with time-based ACL support
Security	IP-MAC-Port Binding, Port Security, DoS Defend, Storm Control and DHCP Snooping
802.1X Authentication	Port-based and MAC-based authentication with RADIUS support
IPv6 Security	IPv6 ACL and DHCPv6 Snooping
QoS Priority Queues	8 priority queues
QoS Classification	802.1p CoS and DSCP priority
Queue Scheduling	Strict Priority (SP), Weighted Round Robin (WRR) and SP+WRR
Bandwidth Control	Port-based and Flow-based Rate Limiting
QoS Actions	Mirror, Redirect, Rate Limit and QoS Remark

PoE & Advanced Functions

Features	Specifications
PoE Ports	Ports 1–48
PoE Power Budget	384W
Maximum PoE Power	Up to 30W per port
PoE Standard	IEEE 802.3af/at
PoE Management	PoE scheduling, PoE priority and PoE power management
PoE Auto Recovery	Automatically detects and recovers unresponsive PoE-powered devices
PoE Device Support	IP Cameras, Access Points, IP Phones and other IEEE 802.3af/at powered devices

Management & Configuration

Features	Specifications
Management Type	L2+ Managed
Omada SDN	Supported
Cloud Management	Supported through Omada Cloud-Based Controller, Omada Hardware Controller and Omada Software Controller
Cloud Access	Supported with compatible Omada Controller
Zero-Touch Provisioning	Supported
Web Management	Web-based GUI
Command Line Interface	CLI through Console, Telnet and SSH
SNMP	SNMP v1/v2c/v3
RMON	RMON Groups 1, 2, 3 and 9
LLDP	802.1ab LLDP / LLDP-MED
Monitoring	CPU Monitoring, Cable Diagnostics and System Log
Configuration	DHCP AutoInstall, Dual Image, Dual Configuration and SNTP
EEE	Energy Efficient Ethernet

Hardware & General

Features	Specifications
Fan	3 Fans
Power Supply	100–240V AC, 50/60Hz
Maximum Power Consumption	Up to 464.2W with 384W PoE load (V3)
Dimensions	440 × 330 × 44 mm
Mounting	Rack Mountable
Operating Temperature	0–40°C
Storage Temperature	-40–70°C
Operating Humidity	10–90% RH, non-condensing
Storage Humidity	5–90% RH, non-condensing
Certification	CE, FCC, RoHS

Note: TL-SG3452P provides 48 Gigabit PoE+ ports with a total 384W PoE budget and 4 Gigabit SFP slots. It supports Omada SDN, advanced Layer 2 and Layer 3 features, static routing, ACL and QoS.

Important: TL-SG3452P has multiple hardware revisions including V1, V2 and V3. Specifications such as maximum power consumption and supported management functions may vary by hardware revision.