Specifications IP-COM iUAP-AC-LR

Features	Specifications
Product Type	Dual-Band Long Range Access Point
Wi-Fi Standard	IEEE 802.11a/b/g/n/ac Wave 2
Wi-Fi Generation	Wi-Fi 5
2.4GHz Speed	Up to 450Mbps
5GHz Speed	Up to 867Mbps
Maximum Dual-Band Rate	Up to 1317Mbps
MIMO	3×3 MU-MIMO
Wireless Coverage	Up to 200m
Max. Connected Clients	128 on 2.4GHz / 256 on 5GHz
Operating Modes	AP, Client+AP
Channel Width	20/40MHz on 2.4GHz and 20/40/80MHz on 5GHz
MU-MIMO	Supported

Wireless & Antenna

Features	Specifications
Antenna Type	Built-in Omnidirectional Antennas
Antenna Gain	3 × 4dBi
2.4GHz Maximum TX Power	29 ± 1.5dBm
5GHz Maximum TX Power	26 ± 1.5dBm
802.11b RX Sensitivity	-94dBm
2.4GHz 802.11n RX Sensitivity	-73dBm at MCS7
5GHz 802.11a RX Sensitivity	-93dBm
5GHz 802.11n RX Sensitivity	-74dBm at MCS7
Wireless Security	WEP, WPA-PSK, WPA2-PSK, WPA, WPA2

Network & Management

Features	Specifications
Networking Interface	1 × 10/100/1000 Base-TX
SSID	Up to 8 on 2.4GHz / 4 on 5GHz
SSID Hiding	Supported
MAC Access Control	Supported
AP Isolation	Supported
RSSI Threshold	Supported
VLAN	VLAN Tagging for SSID
Management	Web UI and AC Controller
Diagnostics	Ping, Traceroute
Firmware Upgrade	Local and Controller Upgrade

Power & General

Features	Specifications
Power Method	IEEE 802.3at PoE / 24V, 0.5A Passive PoE
Maximum Power Consumption	13.5W
Mounting	Ceiling / Wall
Dimensions	176 × 176 × 43.5mm
Reset Button	1 × Reset
LED	1 × Power LED
Operating Temperature	-10°C to +45°C
Operating Humidity	10% to 90% RH, Non-condensing
Storage Temperature	-30°C to +70°C
Storage Humidity	10% to 90% RH, Non-condensing

Note: The IP-COM iUAP-AC-LR is a dual-band Wi-Fi 5 Wave 2 access point featuring 3×3 MU-MIMO, up to 1317Mbps dual-band throughput, Gigabit Ethernet and long-range wireless coverage.

Important: The iUAP-AC-LR is listed by IP-COM as an EOL product. Actual wireless performance depends on environmental conditions, interference, channel configuration and connected client devices.