Uniview NSW2010-10GT-POE-IN

Uniview NSW2010-10GT-POE-IN

NSW2010-10GT-POE-IN

10-Port Gigabit PoE Switch

  • 8 × Gigabit PoE ports for powering network devices
  • 2 × Gigabit uplink ports for network connectivity
  • Supports IEEE 802.3af/at PoE standards
  • Supports long-distance PoE transmission up to 250m
  • Designed for IP cameras, access points and other PoE devices
  • Suitable for surveillance, enterprise and network applications
หมวดหมู่: , , , ป้ายกำกับ:

Specifications Uniview NSW2010-10GT-POE-IN

Features Description
Product Type Gigabit PoE Ethernet Switch
PoE Ports 8 × 10/100/1000 Mbps PoE RJ45
Uplink Ports 2 × 10/100/1000 Mbps RJ45
PoE Standard IEEE 802.3af / IEEE 802.3at
PoE Mode Mode A (1/2+, 3/6-)
PoE Power per Port Up to 30 W
Total PoE Power Up to 120 W
Switching Capacity 20 Gbps
Forwarding Performance 14.88 Mpps
MAC Address Table 2K
Packet Buffer 2 Mbit
Standards & Functions Description
Network Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3az, IEEE 802.3x
Flow Control IEEE 802.3x Full Duplex / Backpressure Half Duplex
Working Modes Default (Normal), VLAN (Secure), Extend (Surveillance)
Extend Mode Transmission distance up to 250 m
Switching Method Store-and-Forward
Auto Detection Automatic PoE Device Detection
General Description
Power Supply AC 100–240 V, 50/60 Hz
Maximum Power Consumption 130 W
Cooling 1 × Cooling Fan
Operating Temperature 0°C to 40°C
Operating Humidity 10%–90%, Non-Condensing
Dimension 220 × 150 × 44 mm
Weight <1.24 kg

Uniview NSW2010-10GT-POE-IN

Note: The Uniview NSW2010-10GT-POE-IN is an 8-port Gigabit PoE Ethernet Switch featuring 8 × Gigabit PoE ports and 2 × Gigabit uplink ports. It supports IEEE 802.3af/at, up to 30 W per PoE port, a total PoE power budget of 120 W, and Extend mode for transmission distances up to 250 m.

Datasheet

รีวิว

ยังไม่มีบทวิจารณ์

มาเป็นคนแรกที่วิจารณ์ “Uniview NSW2010-10GT-POE-IN”

อีเมลของคุณจะไม่แสดงให้คนอื่นเห็น ช่องข้อมูลจำเป็นถูกทำเครื่องหมาย *

one × four =

สินค้าที่เกี่ยวข้อง