| Features |
Description |
| Device Type |
8-Port 10GE SFP+ L2+ Managed Switch |
| Network Ports |
8 × 10Gbps SFP+ Slots |
| Switch Type |
L2+ Managed Switch |
| Switching Capacity |
160 Gbps |
| Packet Forwarding Rate |
119.04 Mpps |
| MAC Address Table |
32K |
| Packet Buffer Memory |
16 Mbit |
| Jumbo Frame |
9 KB |
| VLAN |
802.1Q VLAN, MAC VLAN, Protocol VLAN, Private VLAN, Voice VLAN and QinQ |
| Routing |
IPv4/IPv6 Static Routing |
| Link Aggregation |
Static Link Aggregation and LACP |
| QoS |
802.1p CoS/DSCP Priority, 8 Priority Queues and Bandwidth Control |
| Management |
Omada SDN, Web GUI, CLI, SNMP and RMON |
| Design |
Fanless Metal Housing |
| SFP+ Slots |
8 × 10Gbps SFP+ |
| Console Ports |
1 × RJ45 Console Port, 1 × Micro-USB Console Port |
| Switching Capacity |
160 Gbps |
| Packet Forwarding Rate |
119.04 Mpps |
| MAC Address Table |
32K |
| Packet Buffer Memory |
16 Mbit |
| Jumbo Frame |
9 KB |
| Transmission Method |
Store-and-Forward |
| Flow Control |
IEEE 802.3x Flow Control |
| PoE |
Not Supported |
| SMART FEATURES |
| 8-Port 10G SFP+ |
Provides 8 × 10Gbps SFP+ Slots for High-Bandwidth Fiber or DAC Network Connections |
| Omada SDN |
Supports Centralized Cloud-Based Management and Monitoring Through the Omada Software-Defined Networking Platform |
| Static Routing |
Supports IPv4/IPv6 Static Routing for Efficient Internal Network Traffic Management |
| 802.1Q VLAN |
Supports VLAN Segmentation for Network Isolation and Improved Network Security |
| QinQ |
Supports VLAN Stacking for Carrier and Service Provider Network Applications |
| Link Aggregation |
Supports Static Link Aggregation and LACP for Increased Bandwidth and Link Redundancy |
| QoS |
Supports 802.1p CoS/DSCP Priority, 8 Priority Queues and Bandwidth Control for Traffic Management |
| ACL |
Supports MAC, IPv4 and IPv6 Access Control Lists for Network Traffic Security |
| IGMP Snooping |
Supports IGMP Snooping and MLD Snooping for Optimized Multicast Traffic Delivery |
| Spanning Tree |
Supports STP, RSTP and MSTP for Loop Prevention and Network Redundancy |
| ERPS |
Supports Ethernet Ring Protection Switching for Rapid Protection and Recovery in Ring Network Topologies |
| OAM |
Supports Ethernet Operations, Administration and Maintenance Functions |
| DDM |
Supports Digital Diagnostic Monitoring for Compatible SFP+ Modules |
| Port Mirroring |
Copies Network Traffic From Selected Ports to a Monitoring Port for Network Analysis and Troubleshooting |
| Security |
Supports 802.1X, DHCP Snooping, ARP Inspection, IP Source Guard, Port Security, DoS Protection and Storm Control |
| IPv6 Support |
Supports IPv6 Interfaces, IPv6 ACL, MLD Snooping and Static IPv6 Routing |
| GENERAL |
| Switch Type |
L2+ Managed 10G Fiber Switch |
| Network Ports |
8 × 10Gbps SFP+ |
| PoE |
Not Supported |
| Management |
Omada SDN, Web GUI, CLI, SNMP and RMON |
| Installation Method |
19-Inch Rack Mount |
| Enclosure |
Metal Housing |
| Fan |
Fanless |
| Power Supply |
100–240V AC, 50/60Hz |
| Maximum Power Consumption |
15.46 W |
| Maximum Heat Dissipation |
52.75 BTU/hr |
| Dimensions |
440 × 180 × 44 mm |
| Operating Temperature |
0°C to 50°C |
| Storage Temperature |
-40°C to 70°C |
| Operating Humidity |
10% to 90% RH, Non-Condensing |
| Storage Humidity |
5% to 90% RH, Non-Condensing |
| Certification |
CE, FCC and RoHS |
Note: The TP-Link SX3008F is an 8-port 10G SFP+ L2+ managed switch featuring 8 × 10Gbps SFP+ slots, 160 Gbps switching capacity, 119.04 Mpps packet forwarding performance, a 32K MAC address table and 16 Mbit packet buffer memory. It is designed for 10G aggregation, server, NAS, backbone and high-speed fiber network applications.
Important: The SX3008F is a fiber-only 10G switch with SFP+ ports; it does not have RJ45 Ethernet ports and does not provide PoE. It supports Omada SDN centralized management as well as standalone Web/CLI/SNMP/RMON management. The switch uses a fanless design for silent operation and is rack-mountable.
