| Features |
Description |
| Device Type |
48-Port Gigabit L2+ Managed Switch with 4 × 10G SFP+ Slots |
| Network Ports |
48 × 10/100/1000Mbps RJ45 Ports |
| Uplink Ports |
4 × 10Gbps SFP+ Slots |
| Switch Type |
L2+ Managed Switch |
| Switching Capacity |
176 Gbps |
| Packet Forwarding Rate |
130.94 Mpps |
| MAC Address Table |
16K |
| Packet Buffer Memory |
12 Mbit |
| Jumbo Frame |
9 KB |
| VLAN |
802.1Q VLAN, MAC VLAN, Protocol VLAN, Private VLAN and Voice VLAN |
| Routing |
IPv4/IPv6 Static Routing |
| Link Aggregation |
Static Link Aggregation and LACP |
| QoS |
802.1p CoS/DSCP Priority, 8 Priority Queues and Bandwidth Control |
| Management |
Omada SDN, Web GUI, CLI, SNMP and RMON |
| Design |
Fanless Metal Housing |
| RJ45 Ports |
48 × 10/100/1000Mbps |
| SFP+ Slots |
4 × 10Gbps SFP+ |
| Console Ports |
1 × RJ45 Console Port, 1 × Micro-USB Console Port |
| Auto Negotiation |
Supported |
| Auto MDI/MDIX |
Supported |
| Switching Capacity |
176 Gbps |
| Packet Forwarding Rate |
130.94 Mpps |
| MAC Address Table |
16K |
| Packet Buffer Memory |
12 Mbit |
| Jumbo Frame |
9 KB |
| Transmission Method |
Store-and-Forward |
| Flow Control |
IEEE 802.3x Flow Control |
| PoE |
Not Supported |
| SMART FEATURES |
| 48-Port Gigabit Ethernet |
Provides 48 × 10/100/1000Mbps RJ45 Ports for Reliable Gigabit Network Connections |
| 10G SFP+ Uplinks |
Provides 4 × 10Gbps SFP+ Slots for High-Bandwidth Uplink Connections |
| Omada SDN |
Supports Centralized Cloud-Based Management and Monitoring Through the Omada Software-Defined Networking Platform |
| Static Routing |
Supports IPv4/IPv6 Static Routing for Efficient Internal Traffic Management |
| 802.1Q VLAN |
Supports VLAN Segmentation for Network Isolation and Traffic Management |
| Link Aggregation |
Supports Static Link Aggregation and LACP for Increased Bandwidth and Link Redundancy |
| QoS |
Supports 802.1p CoS/DSCP Priority, 8 Priority Queues and SP, WRR and SP+WRR Scheduling |
| ACL |
Supports Access Control Lists for Network Traffic Filtering and Security |
| IGMP Snooping |
Supports IGMP Snooping for Optimized Multicast Traffic Delivery |
| Spanning Tree |
Supports STP, RSTP and MSTP for Loop Prevention and Network Redundancy |
| ERPS |
Supports Ethernet Ring Protection Switching for Rapid Protection and Recovery in Ring Network Topologies |
| OAM |
Supports Ethernet Operations, Administration and Maintenance Functions |
| DDM |
Supports Digital Diagnostic Monitoring for Compatible SFP+ Modules |
| 802.1X |
Supports Port-Based and MAC-Based Authentication with RADIUS |
| DHCP Snooping |
Helps Protect the Network Against Unauthorized DHCP Servers and DHCP-Based Attacks |
| IP Source Guard |
Helps Prevent IP Address Spoofing and Unauthorized Network Access |
| Port Security |
Controls Access to Network Ports Based on MAC Addresses |
| DoS Protection |
Provides Protection Against Common Denial-of-Service Attacks |
| Storm Control |
Controls Broadcast, Multicast and Unknown Unicast Traffic to Prevent Network Congestion |
| GENERAL |
| Switch Type |
L2+ Managed Gigabit Switch |
| Network Ports |
48 × 10/100/1000Mbps RJ45 |
| Uplink Ports |
4 × 10Gbps SFP+ |
| PoE |
Not Supported |
| Management |
Omada SDN, Web GUI, CLI, SNMP and RMON |
| Installation Method |
19-Inch Rack Mount |
| Enclosure |
Metal Housing |
| Fan |
Fanless |
| Power Supply |
100–240V AC, 50/60Hz |
| Maximum Power Consumption |
32.72 W at 110V/60Hz |
| Maximum Heat Dissipation |
111.65 BTU/hr at 110V/60Hz |
| Dimensions |
440 × 220 × 44 mm |
| Operating Temperature |
0°C to 45°C |
| Storage Temperature |
-40°C to 70°C |
| Operating Humidity |
10% to 90% RH, Non-Condensing |
| Storage Humidity |
5% to 90% RH, Non-Condensing |
| Certification |
CE, FCC and RoHS |
Note: The TP-Link Omada SG3452X is a 48-port Gigabit L2+ managed switch featuring 48 × 10/100/1000Mbps RJ45 ports and 4 × 10Gbps SFP+ slots. It provides 176 Gbps switching capacity, 130.94 Mpps packet forwarding performance, a 16K MAC address table and 12 Mbit packet buffer memory. It is designed for enterprise networks, campus networks, offices, server connectivity and high-bandwidth 10G uplink applications.
Important: The SG3452X is a non-PoE switch. It provides 48 Gigabit RJ45 ports for client devices and 4 × 10Gbps SFP+ ports for high-speed uplinks. The switch features a fanless design for silent operation and supports Omada centralized management, Static Routing, VLAN, ACL, QoS, LACP, IGMP Snooping, ERPS, OAM and DDM.