Specifications UNITEC Hypermax 1200VA Puresine

Features	Specifications
Product Type	Uninterruptible Power Supply (UPS)
Model	Hyper Max 1200VA/840W Pure Sine Wave
Capacity	1200VA / 840W
Topology	Line Interactive with Stabilizer
Power Factor	0.7
Control System	Microprocessor Control
AVR	Automatic Voltage Regulation (Buck & Boost)
Waveform	Pure Sine Wave
Transfer Time	Typical 2 ms

Input & Output

Features	Specifications
Input Voltage	220 VAC ±25%
Input Frequency	50/60 Hz ±10%, Auto Sensing
Input Connection	NEMA 5-15P
Output Voltage	220 VAC ±10% (AVR), ±5% (Battery)
Output Frequency	50 Hz ±0.1%
Output Connections	8 × NEMA Universal
USB Port	Supported

Protection & Battery

Features	Specifications
Battery Type	Maintenance-Free Sealed Lead-Acid Battery
Battery Configuration	12V 7.2Ah × 2
Recharge Time	4–6 hours to 90% after fully discharged
Backup Time	15–30 minutes, depending on load
Surge Protection	320 Joules (6500A)
Noise Filter	EMI Suppression
Overload Protection	Reset Fuse Protection
Short Circuit Protection	Reset Fuse Protection
Deep Discharge Protection	Supported
DC Start	Supported
Auto Restart	Supported

Display & Management

Features	Specifications
Display	Digital LCD Display
LCD Information	AC Mode, Battery Mode, Input Voltage, Output Voltage, Battery Level, Load Level, Low Battery, Overload and Fault
Battery Management	Automatic Constant Voltage Charging and Replace Battery Alert
USB Monitoring	Supported

General

Features	Specifications
Operating Temperature	0°C to 40°C
Operating Humidity	Up to 90%, non-condensing
Audible Noise	<40 dB at 1 meter
Dimensions	338 × 149.3 × 162 mm
Weight	8.1 kg
Form Factor	Tower
Warranty	2 Years Onsite

Note: The UNITEC Hypermax 1200VA Puresine is a 1200VA/840W Line Interactive UPS with Pure Sine Wave output, AVR, LCD display, USB monitoring, DC Start and automatic battery management.

Important: Actual backup time depends on the connected load and battery condition. The specified 15–30 minute backup time is load dependent.