Specifications TP-Link Omada EAP625GP-Wall
| Features | Specifications |
|---|---|
Wireless |
|
| Product Type | AX1800 Wall Plate Wi-Fi 6 GPON Access Point |
| Wi-Fi Standard | IEEE 802.11a/b/g/n/ac/ax |
| Wireless Speed | 574 Mbps on 2.4 GHz + 1201 Mbps on 5 GHz |
| Frequency | 2.4 GHz and 5 GHz |
| Spatial Streams | 2×2 MU-MIMO on 2.4 GHz and 5 GHz |
| Channel Width | Up to 80 MHz on 5 GHz |
| Wireless Client Capacity | 120+ Clients |
| Coverage | Up to 50 m² (600 ft²), depending on environment |
| Antenna | Internal Omnidirectional |
| Antenna Gain | 2.4 GHz: 2 × 4 dBi; 5 GHz: 2 × 6.5 dBi |
GPON |
|
| GPON Port | 1 × GPON Port |
| Connector | SC-APC |
| GPON Standard | ITU-T G.984.x, G.988, Class B+ |
| Downstream Rate | 2.488 Gbps |
| Upstream Rate | 1.244 Gbps |
| Wavelength | Tx: 1310 nm; Rx: 1490 nm |
| Fiber Type | 9/125 μm Single Mode Fiber |
| Maximum Fiber Distance | 20 km |
| Transmit Power | 0.5–5 dBm |
| Receiver Sensitivity | -27 dBm |
| Overload Power | -8 dBm |
Interfaces |
|
| Ethernet Ports | 2 × Gigabit RJ45 |
| PoE Output | 1 × Gigabit RJ45 supporting 802.3af PoE Out |
| Telephone Port | 1 × FXS RJ11 |
| Reset | 1 × Reset Button |
| LED | LED Status Indicator |
Wireless Features |
|
| OFDMA | Supported |
| Beamforming | Supported |
| Omada Mesh | Supported |
| Seamless Roaming | Supported |
| SSID | Up to 16 SSIDs, 8 per band |
| Band Steering | Supported |
| Load Balance | Supported |
| Airtime Fairness | Supported |
| Rate Limit | Supported |
| Guest Network | Supported |
| QoS | WMM |
| RADIUS | RADIUS Authentication and Accounting |
Security |
|
| Wireless Security | WPA-Personal/Enterprise, WPA2-Personal/Enterprise, WPA3-Personal/Enterprise |
| Captive Portal | Supported |
| 802.1X | Supported |
| VLAN | Supported |
| MAC Authentication | Supported |
| MAC Filter | Up to 4,000 MAC Addresses |
| Wireless Client Isolation | Supported |
| Rogue AP Detection | Supported |
Management |
|
| Management Platform | Omada Software Controller, Omada Hardware Controller and Omada Cloud-Based Controller |
| Mobile Management | Omada App |
| Centralized Management | Unified Management for Omada OLT and Network Devices |
| Deployment | One-Click Pairing and Automatic Adoption |
| Management Features | Centralized Cloud Management, PPSK and Multiple Portal Support |
Voice & Services |
|
| FXS Port | 1 × RJ11 |
| Voice Service | VoIP Support |
| Supported Services | Data, Voice, VoIP, Wired Internet, Wireless Internet and HD Video |
Power & Physical |
|
| Power Supply | 100–240V AC, 50/60Hz, 0.5A |
| Maximum Power Consumption | 30.5W, including 15W PoE output at full load |
| Mounting | Wall Mounting |
| Dimensions | 143 × 86 × 44.6 mm |
| Weight | 350 g |
Applications |
|
| Deployment | FTTR and FTTH Networks |
| Suitable Environment | Hotels, Multi-Dwelling Units (MDUs), Guest Rooms and Enterprise Buildings |
| Network Applications | Fiber Internet, Wi-Fi Access, VoIP, IP Cameras, PCs, TVs and Network Devices |
Note: The TP-Link Omada EAP625GP-Wall is an AX1800 Wi-Fi 6 wall-plate GPON access point designed for FTTH and FTTR deployments. It integrates a GPON optical interface with dual-band Wi-Fi 6, two Gigabit Ethernet ports, one 802.3af PoE Out port and an FXS telephone interface. The GPON interface supports up to 2.488 Gbps downstream and 1.244 Gbps upstream over single-mode fiber up to 20 km. It also supports Omada Mesh, seamless roaming, centralized management, PPSK, captive portal and multiple network services over a single fiber connection.
