Specifications Uniview NSW2010-10T-PoE-IN
| Features | Specifications |
|---|---|
Switch |
|
| Product Type | Unmanaged PoE Ethernet Switch |
| Network Ports | 10 × 100Mbps RJ45 Ports |
| PoE Ports | 8 Ports |
| Switching Capacity | 2Gbps |
| Forwarding Performance | 1.49Mpps |
| Packet Buffer | 2Mbit |
| MAC Address Table | 8K |
PoE |
|
| PoE Standard | IEEE 802.3af / IEEE 802.3at |
| PoE Mode | Mode A (1/2+, 3/6−) |
| Total PoE Power | Up to 120W |
| Maximum Power per Port | Up to 30W |
| PoE Port Detection | Automatically Detects and Supplies Power to IEEE 802.3af/at Compatible Devices |
Working Modes |
|
| Normal Mode | All Ports Can Communicate with Each Other |
| VLAN Mode | Downlink Ports Can Communicate Only with Uplink Ports |
| EXTEND Mode | Transmission Distance up to 250m for Surveillance Applications |
| Traffic Control | Supported |
| Buffer Optimization | Supported |
Network Standards |
|
| Supported Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az |
Indicators |
|
| Power Indicator | Steady On: AC Input Is Normal; Off: No AC Input |
| PoE Indicator | Off: No PoE Power; Steady On: PoE Power Is Normal; Flashing: PoE Power Is Abnormal |
| LINK/ACT Indicator | Off: No Link; Steady On: Linked at 10/100Mbps; Flashing: Data Transmission |
| Speed Indicator | Off: Linked at 10/100Mbps; On: Linked at 1000Mbps |
General |
|
| Power Supply | 100–240V AC, 50/60Hz |
| Switch Power | 122W |
| Maximum Power Consumption | 130W |
| Surge Protection | Common Mode ±6kV; Differential Mode ±4kV |
| Electrostatic Protection | Common Mode ±6kV; Differential Mode ±8kV |
| Cooling | Fanless |
| MTBF | >50,000 Hours |
| Operating Temperature | 0°C to 45°C |
| Operating Humidity | 10% to 90%, Non-Condensing |
| Storage Humidity | 5% to 90%, Non-Condensing |
| Dimensions | 220 × 150 × 44mm |
| Weight | <1.22kg |
| Housing | Metal |
Note: The Uniview NSW2010-10T-PoE-IN is an unmanaged PoE Ethernet switch designed for IP surveillance and network applications. It provides 10 × 100Mbps RJ45 ports, including 8 PoE ports supporting IEEE 802.3af and IEEE 802.3at standards. The switch offers up to 120W total PoE power and up to 30W per PoE port. It supports Normal, VLAN and EXTEND modes, with EXTEND mode providing transmission distances of up to 250m for surveillance applications. Traffic control and buffer optimization are also supported. The fanless metal design provides a practical solution for IP cameras, access points, IP phones and other PoE devices.
รีวิว
ยังไม่มีบทวิจารณ์