Specifications IP-COM F1110P-8-102W
| Features | Specifications |
|---|---|
General |
|
| Product Type | Unmanaged PoE Switch |
| Switch Type | Desktop PoE Switch |
| Number of Ports | 10 Ports |
| Management | Unmanaged |
| Switching Capacity | 5.6 Gbps |
| MAC Address Table | 4K |
| MTBF | ≥50,000 Hours |
Network Interfaces |
|
| PoE Ports | 8 × 10/100 Mbps RJ45 |
| Uplink Ports | 2 × 10/100/1000 Mbps RJ45 |
| Port Type | 10/100BASE-TX and 10/100/1000BASE-T |
| Forwarding | Wire-Speed Forwarding |
| Forwarding Method | Store-and-Forward |
PoE |
|
| PoE Standard | IEEE 802.3af / IEEE 802.3at |
| PoE Ports | Ports 1–8 |
| Maximum PoE Power per Port | 30 W |
| Maximum PoE Budget | 99 W |
| PoE Power Type | End-Span |
| PoE Pin Assignment | 1/2 (+), 3/6 (-) |
| PoE Protection | Overload, Overvoltage, Overtemperature and Short-Circuit Protection |
Operating Modes |
|
| Default Mode | Works as a General Switch with 10/100 Mbps Auto-Negotiation |
| VLAN Mode | Ports 1–8 are Isolated from Each Other while Maintaining Communication with Uplink Ports 9–10 |
| Extend Mode | Ports 1–4 Support Extended PoE and Data Transmission up to 250 m at 10 Mbps |
| Port Isolation | Supported in VLAN and Extend Modes |
Protection |
|
| Lightning Protection | 6 kV |
| PoE Protection | PSE Short-Circuit, Overload, Overtemperature, Overvoltage and Surge Current Protection |
| Network Protection | 6 kV Surge Protection |
LED Indicators |
|
| Port Indicators | Link/Act |
| PoE Indicator | PoE Status |
| Power Indicator | Power |
| Gigabit Indicator | 1000M |
Power & Environment |
|
| Input Voltage | AC 100–240V, 50/60Hz |
| Power Adapter Output | DC 51V / 2.1A |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -40°C to 70°C |
| Operating Humidity | 10%–90% RH, Non-Condensing |
| Storage Humidity | 5%–90% RH |
Physical |
|
| Installation | Desktop |
| Dimensions | 177.5 × 104 × 26 mm |
Standards & Compliance |
|
| Ethernet Standards | IEEE 802.3, IEEE 802.3u and IEEE 802.3x |
| PoE Standards | IEEE 802.3af and IEEE 802.3at |
| Certifications | 3C, FCC and CE |
| Environmental Compliance | RoHS |
Applications |
|
| Network Applications | Fast Ethernet and Gigabit Uplink Networks |
| PoE Applications | IP Cameras, Wireless Access Points, IP Phones and Other PoE Devices |
| Surveillance Applications | IP CCTV Surveillance Systems |
| Extended Transmission | PoE and Data Transmission up to 250 m in Extend Mode |
Note: The IP-COM F1110P-8-102W is an unmanaged 10-port desktop PoE switch equipped with 8 × 10/100 Mbps PoE ports and 2 × 10/100/1000 Mbps Gigabit uplink ports. Ports 1–8 support IEEE 802.3af/at PoE with up to 30 W per port and a total PoE power budget of 99 W. The switch supports Default, VLAN and Extend modes. In Extend Mode, ports 1–4 can provide network data and PoE transmission over distances of up to 250 meters at 10 Mbps, making it suitable for IP surveillance installations where cameras or other PoE devices are located far from the network switch. The device also provides 6 kV lightning protection and multiple PoE protection mechanisms for reliable operation.
รีวิว
ยังไม่มีบทวิจารณ์