Specifications IP-COM Pro-6-LR

Features	Specifications
Product Type	Dual-Band Long Range Access Point
Wi-Fi Standard	IEEE 802.11a/b/g/n/ac/ax
Wi-Fi Generation	Wi-Fi 6
2.4GHz Speed	Up to 574Mbps
5GHz Speed	Up to 2,402Mbps
Maximum Dual-Band Rate	Up to 3,000Mbps
MIMO	2×2 MU-MIMO
Channel Width	20/40/80/160MHz
Concurrent Clients	Up to 254
OFDMA	Supported
Beamforming	Supported
TWT	Supported

Wireless & Antenna

Features	Specifications
Antenna Type	Built-in Omnidirectional Antennas
Antenna Gain	4 × 4dBi
2.4GHz Maximum TX Power	29 ± 1.5dBm
5GHz Maximum TX Power	29 ± 1.5dBm
2.4GHz RX Sensitivity	-97dBm at 802.11b / -75dBm at MCS7
5GHz RX Sensitivity	-95dBm at 802.11a / -75dBm at MCS7
Wireless Security	WEP, WPA-PSK, WPA2-PSK, WPA, WPA2
SSID	Up to 7 on 2.4GHz / 4 on 5GHz

Network & Management

Features	Specifications
Networking Interface	1 × 10/100/1000Mbps Ethernet + 1 × 10/100/1000Mbps PoE
Management	ProFi Cloud, ProFi Software Controller, Local Web Interface
Controller Management	Supported by IP-COM M Series and AC Controllers
Hide SSID	Supported
VLAN	Supported
Fast Roaming	802.11k/v
Client Isolation	Supported
Captive Portal	Supported

Power & General

Features	Specifications
Power Method	IEEE 802.3at PoE
Maximum Power Consumption	15.74W
PoE Injector	Included
Mounting	Ceiling
Dimensions	Ø250.6 × 55mm
Reset Button	1 × Reset
LED Indicator	RGB
Operating Temperature	-10°C to +45°C
Operating Humidity	10% to 90% RH, Non-condensing

Note: The IP-COM Pro-6-LR is a Wi-Fi 6 AX3000 long-range access point featuring 2×2 MU-MIMO, up to 3Gbps dual-band wireless throughput, 160MHz channel bandwidth and centralized ProFi management.

Important: Actual wireless performance depends on environmental conditions, interference, channel configuration and connected client devices.