Ruijie RG-CS83-24GT4XS-PD | 24-Port 1GE RJ45 Layer 3 Managed Access Switch with PoE+
Ruijie RG-CS83-24GT4XS-PD
คุณสมบัติ
- สวิตช์ Layer 2 แบบ Cloud Managed สำหรับองค์กรและระบบเครือข่ายมืออาชีพ
- 24 พอร์ต Gigabit Ethernet รองรับ PoE+ จ่ายไฟให้ AP และ IP Camera
- 4 พอร์ต 10G SFP+ สำหรับ Uplink ความเร็วสูงและ Core Network
- PoE Budget สูงถึง 370W รองรับอุปกรณ์จำนวนมากพร้อมกัน
- บริหารจัดการผ่าน Reyee Cloud ได้จากทุกที่
- รองรับ VLAN, QoS, LACP และระบบรักษาความปลอดภัยระดับองค์กร
*** ผู้รับเหมาโครงการต้องการราคาพิเศษสนใจติดต่อ ***
เบอร์มือถือ : 063-1963553 ไอดีไลน์ : ifocusshop
Ruijie RG-CS83-24GT4XS-PD
24-Port Gigabit Layer 2 Cloud Managed PoE Switch with 4×10G SFP+
Ruijie RG-CS83-24GT4XS-PD เป็นสวิตช์ Layer 2 แบบ Cloud Managed จาก Ruijie Reyee ออกแบบมาสำหรับองค์กรขนาดกลางถึงขนาดใหญ่ รองรับการจ่ายไฟ PoE+ ให้กับอุปกรณ์เครือข่าย เช่น Access Point, IP Camera และ IP Phone ได้อย่างมีประสิทธิภาพ มาพร้อมพอร์ต Gigabit Ethernet 24 พอร์ต และ 10G SFP+ 4 พอร์ต สำหรับ Uplink ความเร็วสูง รองรับการบริหารจัดการผ่าน Reyee Cloud ช่วยให้ดูแลระบบเครือข่ายได้ง่าย ปลอดภัย และเสถียร
| Port Specifications | RG-CS83-24GT4XS-PD | RG-CS83-48GT4XS-PD |
| Fixed service port | 24 x 10/100/1000BASE-T ports, supporting PoE/PoE+
4 x 1GE/10GE SFP+ ports |
48 x 10/100/1000BASE-T ports, supporting PoE/PoE+
4 x 1GE/10GE SFP+ ports |
| Module slot | 2 x power module slots | |
| Power module | RG-PA600I-P-F
RG-PA1000I-P-F |
|
| Fixed management ports | 1 x RJ45 console port
1 x RJ45 MGMT port |
|
| USB | 1 x USB port | |
| System Specifications | RG-CS83-24GT4XS-PD | RG-CS83-48GT4XS-PD |
| Packet forwarding rate | 96 Mpps | 132 Mpps |
| Switching capacity | 128 Gbps | 176 Gbps |
| CPU | Dual-core CPU, each core with the clock speed of 1.2 GHz | |
| BootROM | 16 MB | |
| Flash memory | 2 GB | |
| Memory | 1 GB | |
| Switch buffer | 3 MB | |
| MAC address table size | 32,000 | |
| ARP table size | 4,000 | |
| Number of IPv4 unicast routes | 8,000 | |
| Number of IPv4 multicast routes | 2,500 | |
| Number of IPv6 unicast routes | 4,000 | |
| Number of IPv6 multicast routes | 1,200 | |
| Number of ACEs | Ingress: 3,500
Egress:1,500 |
|
| Number of VSU members | 4 | |
| VLAN translation | 4,094 | |
| Dimensions and Weight | RG-CS83-24GT4XS-PD | RG-CS83-48GT4XS-PD |
| Unit dimensions (W x D x H) | 442 mm x 420 mm x 43.6 mm (17.40 in.x 16.54 in.x 1.72 in.) | |
| Shipping dimensions (W x D x H) | 570 mm x 565 mm x 172 mm (22.44 in. x 22.24 in. x 6.77 in.) | |
| Rack height | 1 RU | |
| Unit weight | 4.3 kg (9.48 lbs) | 4.6 kg (10.14 lbs) |
| Shipping weight | 6.78 kg (14.95 lbs) | 6.98 kg (15.39 lbs) |
| Power Supply and Consumption | RG-CS83-24GT4XS-PD | RG-CS83-48GT4XS-PD |
| Power supply | 2 x pluggable power modules | |
| Power module redundancy | For dual power supplies, 1+1 power redundancy is supported only when the total PoE load of the device is less than the PoE output power of a single power supply | |
| Power input | RG-PA600I-P-F (AC input):
● Rated input voltage: 100 V AC to 240 V AC, 50 Hz to 60 Hz ● Maximum input voltage: 90 V AC to 264 V AC, 47 Hz to 63 Hz ● Maximum input current: 8 A RG-PA1000I-P-F (AC input 1): ● Rated input voltage: 100 V AC to 130 V AC, 50 Hz to 60 Hz ● Maximum input voltage: 90 V AC to 143 V AC, 47 Hz to 63 Hz ● Maximum input current: 12 A RG-PA1000I-P-F (AC input 2): ● Rated input voltage: 200 V AC to 240 V AC, 50 Hz to 60 Hz ● Maximum input voltage: 180 V AC to 264 V AC, 47 Hz to 63 Hz ● Maximum input current: 8 A |
|
| Maximum output power | RG-PA600I-P-F: 600 W
RG-PA1000I-P-F: ● 100 V AC to 130 V AC: 930 W ● 200 V AC to 240 V AC: 1000 W |
|
| Maximum power consumption | 65 W (non-PoE)
810 W (full PoE load) |
75 W (non-PoE)
1570 W (full PoE load) |
| PoE port | All RJ45 ports support PoE/PoE+ (IEEE802.3af/at) power supply | |
| PoE power cable pairs | Mode A (1-2, 3-6 pairs) | |
| PoE output power | Each PoE port provides up to 30 W of power
The maximum power depends on the configured power supply. ● 1 x RG-PA600I-P-F: 370 W ● 2 x RG-PA600I-P-F: 740 W; 1 x RG-PA1000I-P-F: 740 W; 2 x RG-PA1000I-P-F: 1480 W; a maximum output of 720 W over 24 ports (30 W x 24) |
Each PoE port provides up to 30 W of power
The maximum power depends on the configured power supply. ● 1 x RG-PA600I-P-F: 370 W ● 2 x RG-PA600I-P-F: 740 W ● 1 x RG-PA1000I-P-F: 740 W ● 2 x RG-PA1000I-P-F: 1480 W, a maximum output of 1440 W over 48 ports (30 W x 48) |
| Energy saving | Supported | |
| Environment and Reliability | RG-CS83-24GT4XS-PD | RG-CS83-48GT4XS-PD |
| Temperature | Operating temperature: 0°C to 45°C (32°F to 113°F)
Storage temperature: –40°C to +70°C (–40°F to +158°F) |
|
| Humidity | Operating humidity: 10% to 90% RH (non-condensing)
Storage humidity: 5% to 95% RH (non-condensing) |
|
| Altitude | Operating altitude: 0 m to 5,000 m (0 ft. to 16,404.20 ft.)
Storage altitude: 0 m to 5,000 m (0 ft. to 16,404.20 ft.) |
|
| Mean time between failure (MTBF) | 356,000 hours (about 41 years, dual power modules)
208,000 hours (about 24 years, single power module) |
315,000 hours (about 36 years, dual power modules)
193,000 hours (about 22 years, single power module) |
| Fan | 1 x fixed fan module | |
| Heat dissipation | Left-to-right and front-to-right airflow | |
| Acoustic noise | 27°C (80.6°F): 51.6 dB
45°C (113°F): 57.4 dB |
27°C (80.6°F): 51.6 dB
45°C (113°F): 58.3 dB |
| Power module hot swapping | Supported | |
| USB hot swapping | Supported | |
| Cable hot swapping | Supported | |
| Power supply monitoring | Monitoring of power supply model and status
Power supply fault alarming |
|
| Fan monitoring | Fan speed adjustment: 3 levels
Automatic speed adjustment Fan failure alarming |
|
| Temperature monitoring | Temperature monitoring, over-temperature alarming
If the ambient temperature exceeds a certain value, the device will perform reset protection |
|
| ESD | ESD contact/air discharge: 6 kV/8 kV
ESD susceptibility contact/air discharge: 8 kV/15 kV |
|
| Surge protection | MGMT port: 4 kV
Service port: 10 kV Power port: common mode 6 kV, differential mode 6 kV |
|
| Conformal coating | Conformal coating supported (key components only) | |
| Certifications and Regulatory Compliance | RG-CS83-24GT4XS-PD | RG-CS83-48GT4XS-PD |
| Safety regulation | IEC 62368-1 | |
| EMC regulation | EN 300386, EN 55032 Class A, EN 55035,
EN IEC 61000-3-2, EN 61000-3-3, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-11 |
|
| Communication standard | IEEE 802.3-2005 Ethernet standard
IEEE 803.ab, IEEE 802.3af, IEEE 802.1d, IEEE 802.1q, IEEE 802.3-2005 (802.3ae), and IEEE 802.3ba (2010) standards, supporting 802.1X authentication |
|
| RG-CS83-PD Series | |
| Feature | Description |
| Ethernet switching
|
Jumbo frame (maximum length: 9216 bytes) |
| IEEE 802.1Q (4K VLANs) | |
| Voice VLAN | |
| Super VLAN and private VLAN | |
| MAC VLAN, port-based VLAN, protocol-based VLAN, and IP-subnet based VLAN | |
| GVRP | |
| Basic QinQ
Selective QinQ |
|
| STP, RSTP, and MSTP | |
| ERPS (G.8032) | |
| LLDP/LLDP-MED | |
| LACP (IEEE 802.3ad) | |
| Non blocking | |
| IP service | ARP |
| DHCP client, DHCP relay, and DHCP server | |
| DHCP snooping | |
| DNS | |
| DHCPv6 client and DHCPv6 relay | |
| DHCPv6 snooping | |
| Neighbor Discovery (ND) and ND snooping | |
| IP routing | Static routing |
| RIP, RIPng | |
| OSPFv2, OSPFv3, IS-ISv4, ISv4, and IS-ISv6 | |
| BGP4 and BGP4+ | |
| IPv4 and IPv6 VRF | |
| IPv4 and IPv6 PBR | |
| Multicast | IGMP v1/v2/v3, and IGMP proxy |
| IGMP v1/v2/v3 snooping | |
| PIM-DM, PIM-SM, and PIM-SSM | |
| MSDP | |
| MLD v1/v2 | |
| MLD snooping v1/v2 | |
| PIM-SMv6, PIM-SSM v6 | |
| ACL and QoS
|
Standard IP ACLs
Extended IP ACLs Extended MAC ACLs ACL80 IPv6 ACL |
| ACL redirection | |
| Port traffic identification | |
| Port traffic rate limiting | |
| 802.1p/DSCP/ToS traffic classification
Eight priority queues per interface |
|
| Traffic policing: CAR | |
| Congestion management: RR, SP, WRR, DRR, WFQ, SP+WRR, SP+DRR, and SP+WFQ | |
| Congestion avoidance: tail drop, RED, and WRED | |
| Rate limiting in each queue | |
| L2/L3/L4 packet identification and classification | |
| Security | Multiple AAA modes |
| RADIUS and TACACS+ | |
| Port-based and MAC-based 802.1x authentication | |
| Web authentication | |
| Allowlist | |
| HTTPS | |
| SSHv1, SSHv2 | |
| Global IP-MAC binding | |
| ICMP | |
| Port isolation and port security | |
| IP Source Guard | |
| SAVI | |
| Gateway ARP anti-spoofing | |
| CPP(CPU Protection Policy） | |
| NFPP( Network Foundation Protection Policy） | |
| Strict and loose RPF
uRPF ignoring default routes |
|
| Reliability | REUP, RLDP, DLDP |
| IPv4 VRRP v2/v3 and IPv6 VRRP | |
| BFD | |
| Link tracing, fault notification, and remote loopback based on 802.3ah (EFM) | |
| Hot swapping of power modules and cables | |
| 3-level fan speed adjustment
Fan fault alarm |
|
| Device virtualization | Virtual Switching Unit (VSU) |
| NMS and maintenance | SPAN, RSPAN, and ERSPAN |
| sFlow | |
| NTP and SNTP | |
| FTP and TFTP | |
| SNMP v1/v2/v3 | |
| RMON (1, 2, 3, 9) | |
| NETCONF | |
| Flow-based mirroring, and N:1 and 1:N port mirroring | |
| CWMP (TR-069) standard protocol | |
| gRPC | |
| Cloud and SON | |
| PoE | IEEE 802.3af and 802.3at
Uninterruptible power supply upon hot start Port priority |
ดาวน์โหลด
