Uniview NSW2010-24T2GC-POE-IN | 24PoE+2GC

Uniview NSW2010-24T2GC-POE-IN

24-Port PoE Switch with 2 Gigabit Combo Ports

  • 24× 100Mbps PoE ports and 2× 1000Mbps Combo ports
  • Supports IEEE 802.3af/at PoE standards
  • 370W maximum PoE power with up to 30W per port
  • 8.8Gbps switching capacity and 6.55Mpps forwarding
  • Supports Normal, VLAN and Surveillance modes
  • Surveillance mode supports transmission distances up to 250m
หมวดหมู่: , , , ป้ายกำกับ:

Specifications Uniview NSW2010-24T2GC-POE-IN

Features Specifications

Switch

Product Type Unmanaged PoE Ethernet Switch
Ports 24 × 100Mbps PoE RJ45 Ports + 2 × 1000Mbps Combo Ports
Switching Capacity 8.8Gbps
Forwarding Performance 6.55Mpps
Packet Buffer 4Mbit
MAC Address Table 16K

PoE

PoE Standard IEEE 802.3af / 802.3at
PoE Ports 24 Ports
Total PoE Power Up to 370W
Maximum Power per Port Up to 30W
PoE Mode Mode A: 1/2+ and 3/6−
PoE Applications IP Cameras, Wireless Access Points, IP Phones and Other PoE Devices

Network Standards

Supported Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az
Traffic Control Supported
Buffer Optimization Supported

Working Modes

Normal Mode All Ports Can Communicate with Each Other
VLAN Mode Downlink Ports Can Communicate Only with Uplink Ports
EXTEND Mode Transmission Distance up to 250m for Surveillance Applications

Uplink

Uplink Ports 2 × 1000Mbps Combo Ports
Combo Interface RJ45 / SFP Combo
Uplink Speed Up to 1000Mbps

General

Power Supply 100–240V AC, 50/60Hz
Maximum Power Consumption 390W
Cooling Fans 2
MTBF >50,000 Hours
Operating Temperature 0°C to 40°C
Operating Humidity 10% to 90%, Non-Condensing
Storage Temperature -40°C to 70°C
Storage Humidity 5% to 90%, Non-Condensing
Dimensions 440 × 207 × 45 mm
Weight <4.2 kg
Housing Metal
Installation Rack Mount

Note: The Uniview NSW2010-24T2GC-POE-IN is an unmanaged PoE Ethernet switch designed for IP surveillance and network applications. It provides 24 × 100Mbps PoE ports and 2 × 1000Mbps Combo uplink ports, with a switching capacity of 8.8Gbps and forwarding performance of 6.55Mpps. The switch supports IEEE 802.3af/at PoE with a total power budget of up to 370W and up to 30W per port. It features Normal, VLAN and EXTEND working modes, with EXTEND mode supporting transmission distances of up to 250m for surveillance devices. The all-metal housing, buffer optimization and traffic control provide a practical solution for CCTV systems, access points and other PoE network devices.

Datasheet

รีวิว

ยังไม่มีบทวิจารณ์

มาเป็นคนแรกที่วิจารณ์ “Uniview NSW2010-24T2GC-POE-IN | 24PoE+2GC”

อีเมลของคุณจะไม่แสดงให้คนอื่นเห็น ช่องข้อมูลจำเป็นถูกทำเครื่องหมาย *

2 + 3 =