RUCKUS ICX 7150-C10ZP
RUCKUS รุ่น ICX 7150-C10ZP
Compact 10 Ports Multigigabit PoE Switch
คุณสมบัติ
- 100/1000 Mbps/2.5 Gbps RJ45 downlinks (full duplex only): 8
- 100/1000 Mbps/2.5/5/10 Gbps RJ45 downlinks (full duplex only): 2
- 1/10 Gbps SFP/SFP+ uplinks: 2
- PoE/PoE+ ports: 6
- PoH / PoE / PoE+ 802.3bt ready ports: 4
- PoE Power Budget, maximum 240 W
- Switching capacity: 120 Gbps
- Lifetime Limited Warranty
*** ผู้รับเหมาโครงการต้องการราคาพิเศษสนใจติดต่อ ***
เบอร์มือถือ : 063-1963553 ไอดีไลน์ : ifocusshop
Ruckus ICX 7150-C10ZP Technical Specifications
General
- Switching capacity (data rate, full duplex): 120 Gbps
- Forwarding capacity (data rate, full duplex): 89 Mpps
- 100/1000 Mbps/2.5 Gbps RJ45 downlinks (full duplex only): 8
- 100/1000 Mbps/2.5/5/10 Gbps RJ45 downlinks (full duplex only): 2
- 1/10 Gbps SFP/SFP+ uplinks: 2
- PoE/PoE+ ports: 6
- PoH / PoE / PoE+ 802.3bt ready ports: 4
- Maximum PoE Class 3 ports (15.4 W per port): 10
- Maximum PoE+ Class 4 ports (30 W per port): 8
- Energy Efficient Ethernet (802.3az): Yes
- Base IPv4/v6 Layer 3 routing (static routing, RIP): Yes
- Advanced IPv4/v6 Layer 3 routing (OSPF, VRRP, PIM, PBR features): With license
- Aggregated stacking bandwidth (data rate, full duplex): 240 Gbps
- Stacking density (maximum switches in a stack): 12
- Stacking ports (maximum ports2 usable for stacking): Up to 2×10 GbE SFP+
- Maximum stacking distance (distance between stacked switches): 10 km
- Campus Fabric: Fabric Port Extender (PE)
Power
- Power inlet (AC): C14
- Input voltage/frequency: AC: 100 to 240 VAC @ 50 to 60 Hz
- Power supply rated maximum (AC): 300W
- PoE power budget (AC): 240W
- Switch power consumption:
– 27W
– 242W
– 245W - Airflow: Fanless
- Switch heat dissipation:
– 93 BTU/hr
– 128 BTU/hr
– 129 BTU/hr
Environment
- Net Weight (Kg): 3.57
- Dimensions (mm): 304 (W) x 305 (D) x 44 (H)
- Acoustics (25°C, min fan speed): Fanless
- MTBF (25°C): 529,625 hours
- Temperature:
– Operating Temperatures: 0°C to 45°C (0°C to 40°C for ICX 7150-C08P and ICX7150-C10P)
– Storage Temperatures: -40°C to 70°C - Humidity:
– Operating relative humidity: 5% to 95% at 45°C, non-condensing
– Non-operating relative humidity: 0% to 95% at 70°C, non-condensing - Altitude:
– Operating altitude: 10,000 ft (3,000 m) maximum
– Storage altitude: 39,000 ft (12,000 m) maximum
Management Ports
- USB Type-C port (for console management)
- RJ45 serial port (for serial console management)
- USB Type-A port (for external file storage)
- RJ45 Ethernet port (for out of band network management)
Connector options
- 10/100/1000 Mbps RJ-45
- 1 Gbps SFP ports
- 1/10 Gbps SFP+ ports
- Out-of-band Ethernet management: 10/100/1000 Mbps RJ-45
- Console management: RJ45 serial port and USB Type-C port with serial communication device class support
- File transfer: USB port, standard-A plug
DRAM
- 1 GB
NVRAM (Flash)
- 2 GB
Packet buffer size
- 8/10/12/24 port: 2 MB, 48 port: 4 MB
Maximum MAC addresses
- 16,384
Maximum VLANs
- 4,095
Maximum PVLANs
- 32
Maximum STP (spanning trees instances)
- 254
Maximum VEs
- 128
Maximum ARP entries
- 4,094
Maximum routes (in hardware)
- 1,000 (IPv4), 1,000 (IPv6)
- Next hop address: 4,094
Trunking
- Maximum ports per trunk: 16
- Maximum trunk groups: 128
Maximum jumbo frame size
- 9,216 bytes
QoS priority queues
- 8 per port
Multicast groups
- 3,072 (Layer 2)
- 2,048 (Layer 3)
Quality of Service (QoS)
- ACL Mapping and Marking of ToS/DSCP (CoS)
- ACL Mapping and Marking of 802.1p
- ACL Mapping to Priority Queue
- Classifying and Limiting Flows Based on TCP Flags
- DiffServ Support
- Honoring DSCP and 802.1p (CoS)
- MAC Address Mapping to Priority Queue
- Priority Queue Management using Weighted Round Robin (WRR), Strict Priority (SP), and a combination of WRR and SP
Traffic management
- ACL-based inbound rate limiting and traffic policies
- Broadcast, multicast, and unknown unicast rate limiting
- Inbound rate limiting per port
- Outbound rate limiting per port and per queue
Security
- 802.1X authentication
- MAC authentication
- Flexible authentication
- Web authentication
- DHCP snooping
- Dynamic ARP inspection
- Neighbor Discovery (ND) Inspection
- Bi-level Access Mode (Standard and EXEC Level)
- EAP pass-through support
- IEEE 802.1X username export in sFlow
- Protection against Denial of Service (DoS) attacks
- Authentication, Authorisation, and Accounting (AAA)
- MAC Address Locking MAC Port Security
- Advanced Encryption Standard (AES) with SSHv2
- RADIUS/TACACS/TACACS+
- Secure Copy (SCP)
- Secure Shell (SSHv2)
- Protected Ports
- Local Username/Password
- Change of Authorisation (CoA) RFC 5176
- Trusted Platform Module
- RADSEC (RFC 6614)
- Encrypted Syslog (RFC 5425)
SDN features
- OpenFlow v1.0 and v1.3
- OpenFlow with hybrid port mode
- Operates with an OpenDayLight Controller
High availability
- Layer 3 VRRP/VRRP-E protocol redundancy
- Real-time state synchronisation across the stack
- Hitless failover and switchover from master to standby stack controller
- Hot insertion and removal of stacked units
- Layer 2 VSRP switch redundancy
- In Service Software Update (ISSU)
Layer 2 feature set
- 802.1s Multiple Spanning Tree
- 802.1x Authentication
- Auto MDI/MDIX
- BPDU Guard, Root Guard
- Dual-Mode VLANs
- MAC-based VLANs, Dynamic MAC-based VLAN activation
- Dynamic VLAN Assignment
- Dynamic Voice VLAN Assignment
- Fast Port Span
- GVRP: GARP VLAN Registration Protocol
- IGMP Snooping (v1/v2/v3)
- IGMP Proxy for Static Groups
- IGMP v2/v3 Fast Leave
- Inter-Packet Gap (IPG) adjustment
- Link Fault Signaling (LFS)
- MAC Address Filtering
- MAC Learning Disable
- MLD Snooping (v1/v2)
- Multi-device Authentication
- Per-VLAN Spanning Tree (PVST/PVST+/PRST)
- Mirroring: Port-based, ACL-based, MAC Filter-based, and VLAN-based
- PIM-SM v2 Snooping
- Port Loop Detection
- Private VLAN
- Remote Fault Notification (RFN)
- Single-instance Spanning Tree
- Trunk Groups (static, LACP)
- Uni-Directional Link Detection (UDLD)
- Metro-Ring Protocol (MRP) (v1, v2)
- Virtual Switch Redundancy Protocol (VSRP)
- Q-in-Q and selective Q-in-Q
- VLAN Mapping
- Topology Groups
Base Layer 3 IP routing feature set
- IPv4 and IPv6 static routes − RIP v1/v2, RIPng
- ECMP
- Port-based Access Control Lists
- Layer 3/Layer 4 ACLs
- Host routes
- Virtual Interfaces
- Routed Interfaces
- Route-only Support
- Routing Between Directly Connected Subnets
Premium Layer 3 IP routing feature set with software license
- IPv4 and IPv6 dynamic routes
- OSPF v2, v3
- PIM-SM, PIM-SSM, PIM-DM, PIM passive (IPv4, IPv6)
- PBR
- Virtual Route Redundancy Protocol VRRP (IPv4)
- VRRP v3 (IPv6)
- VRRP-E(IPv4/IPv6)
IEEE standards compliance
- 802.1AB LLDP/ LLDP-MED
- 802.1D MAC Bridging
- 802.1p Mapping to Priority Queue
- 802.1s Multiple Spanning Tree (MST)
- 802.1w Rapid Reconfiguration of Spanning Tree (RSTP)
- 802.1x Port-based Network Access Control (PNAC)
- 802.3 Carrier Sense Multiple Access/Collision Detection (CSMA/CD)
- 802.3ab 1000BASE-T
- 802.3 10Base-T
- 802.3ad Link Aggregation (Dynamic and Static)
- 802.1 AX-2008 Link Aggregation
- 802.3ae 10 Gigabit Ethernet
- 802.3af Power over Ethernet
- 802.3at Power over Ethernet Plus
- 802.3bz Multigigabit Ethernet
- 802.3u 100Base-TX
- 802.3x Flow Control
- 802.3z 1000Base-SX/LX
- 802.3 MAU MIB (RFC 2239)
- 802.1Q VLAN Tagging
- 802.1BR Bridge Port Extension
- 802.3az Energy Efficient Ethernet
Management
- DHCP Auto Configuration
- Configuration Logging
- Digital Optical Monitoring
- Display Log Messages on Multiple Terminals
- Embedded Web Management (HTTP/HTTPS)
- Embedded DHCP Server
- Industry-standard Command Line Interface (CLI)
- Ruckus SmartZone Network Controller (sold separately)
- CLI activation of optional software features
- USB file management and storage
- Macro for batch execution
- Out-of-band Ethernet Management
- RSPAN
- TFTP
- TELNET Client and Server
- SSH / SSH V2
- Bootp
- SNMPv1/v2c
- DHCP Server and DHCP Relay
- SNMPv3 Intro to Framework
- Architecture for Describing SNMP Framework
- SNMP Message Processing and Dispatching
- SNMPv3 Applications
- SNMPv3 User-based Security Model
- SNMP View-based Access Control Model SNMP
- sFlow
- Network Time Protocol (NTP)
- Multiple Syslog Servers
- SCP
- Virtual Cable Tester (VCT)
Ruckus Campus Fabric technology
- The Ruckus ICX 7150 can operate in fabric Port Extender (PE) mode
- Up to 36 PEs per fabric (up to 1800 ports)
- PE cascade depth up to 6 units
Compliance/Certification
- Electromagnetic emissions: FCC Class A (Part 15); EN 55022/CISPR-22 Class A; VCCI Class A; ICES-003 Electromagnetic Emission; AS/NZS 55022; EN 61000-3-2 Power Line Harmonics; EN 61000-3-3 Voltage Fluctuation and Flicker; EN 61000-6-3 Emission Standard (supersedes: EN 50081-1)
- Safety: CAN/CSA-C22.2 NO. 60950-1-07; UL 60950-1 Second Edition; IEC 60950-1 Second Edition; EN 60950-1:2006 Safety of Information Technology Equipment; EN 60825-1 Safety of Laser Products—Part 1: Equipment Classification, Requirements and User’s Guide; EN 60825-2 Safety of Laser Products—Part 2: Safety of Optical Fibre Communication Systems
- Immunity: EN 61000-6-1 Generic Immunity and Susceptibility (supersedes EN 50082-1); EN 55024 Immunity Characteristics (supersedes EN 61000-4-2 ESD); EN 61000-4-3 Radiated, Radio Frequency, Electromagnetic Field; EN 61000-4-4 Electrical Fast Transient; EN 61000-4-5 Surge; EN 61000-4-6 Conducted Disturbances Induced by Radio-Frequency Fields; EN 61000-4-8 Power Frequency Magnetic Field; EN 61000-4-11 Voltage Dips and Sags
- Environmental regulatory compliance: RoHS-compliant (6 of 6); WEEE-compliant
- Vibration: IEC 68-2-36, IEC 68-2-6
- Shock and drop: IEC 68-2-27, IEC 68-2-32