Zyxel NWA1123-AC HD

Zyxel NWA1123-AC HD

ZyXEL รุ่น NWA1123-AC HD

คุณสมบัติ

Zyxel NWA1123-AC HD Wireless Access Point Dual-Band 2.4/5GHz
มาตรฐาน 802.11ac ความเร็วสูงสุด 1600Mbps 3×3 MU-MIMO Wave2
2 Port Lan Gigabit, Standalone/Nebula Cloud
รองรับ PoE (Not Include)
ประกัน Limited Lifetime

หมวดหมู่: ZYXEL, Access Point, อุปกรณ์เน็ตเวิร์ค (Network) ป้ายกำกับ: Zyzel

* ผู้รับเหมาโครงการต้องการราคาพิเศษสนใจติดต่อ *
เบอร์มือถือ : 063-1963553 ไอดีไลน์ : ifocusshop

Models	NWA1123-AC HD 802.11ac Wave2 Dual-Radio PoE Access Point
RF Specifications
802.11n/ac premium features	2.4GHz: 2×2 MIMO with two spatial stream (SU-MIMO) 5GHz: 3×3 MIMO with three spatial stream (SU-, or MU-MIMO) 802.11ac beamforming (transmit beamforming) Maximal ratio combining (MRC) Low End Sensitivity Improvements (LESI) Time Domain Channel Smoothing 20-, 40- and 80-MHz channels PHY data rates total up to 300 Mbps (11n) + 1300 Mbps (11ac) Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) Cyclic Delay diversity (CSD) support Maximum Likelihood Demodulation (MLD) support Low Density Parity Check (LDPC) support
Typical transmit output power (dBm) ^*1	US (FCC) 2.4 GHz: 25 US (FCC) 5 G GHz: 28 EU (ETSI) 2.4 GHz: 20 EU (ETSI) 5 G GHz: 26
Antenna gain	2.4 GHz: 3 dBi; 2×2 MIMO 5 GHz: 3 dBi 3×3 MIMO
Support data rate	802.11a/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps 802.11n: up to 300 Mbps in MCS15 (40MHz; 2 Spatial Streams; GI=400ns) 802.11ac:up to 1300 Mbps in MCS9 (80MHz; 3 Spatial Streams; GI=400ns)
Receive sensitivity	Min. Rx sensitivity up to -103 dBm
Interfaces
Number of 10/100/1000M LAN	2 x switch ports
Console port	4-Pin serial
Input power requirements	Direct DC power or Power over Ethernet (PoE)^*2
PoE	802.3at (full mode) 802.3af (Restrict 2.4G & 5G radio to one transmit stream only.)
PoE power draw	15.5 W (802.3at PoE)
WLAN
WLAN maximum throughput	Up to 900 Mbps
Fast roaming	Pre-authentication and PMK caching
Wireless Security	WPA/WPA2-PSK WPA/WPA2-Enterprise WLAN access control list EAP type IEEE 802.1X MAC filtering Layer-2 isolation RADIUS authentication^*6
Number of SSID	16
QoS	WMM WMM power save U-APSD DiffServ Marking^*6
Network
IPv6 support	Yes
VLANs	Yes
DHCP client	Yes
Management
ZON Utility^*3	Discovery of Zyxel switches, APs and gateways Centralized and batch configurations IP configuration IP renew Device factory reset Device reboot Device locating Web GUI access Firmware upgrade Password configuration One-click quick association with Zyxel AP Configurator (ZAC)
Smart Connect	Neighbor device discovery One-click remote management access to the neighboring Zyxel devices
Zyxel AP Configurator^*4	Batch AP configuration Batch AP firmware upgrade Batch AP profile backup
Zyxel Wireless Optimizer^56	WiFi AP planning WiFi coverage detection Wireless health management
Standalone AP mode	Yes
CLI	Yes
SNMP	v2c/v3
Standard Compliance
Ethernet	IEEE 802.3 IEEE 802.3u IEEE 802.11ab IEEE 802.3au IEEE 802.3az IEEE 802.3af/at
PoE	IEEE 802.3af/at
WLAN	802.11b: DBPSK, DQPSK, CCK 802.11g: BPSK, QPSK, 16-QAM, 64-QAM 802.11a: BPSK, QPSK, 16-QAM, 64-QAM 802.11n: BPSK, QPSK, 16-QAM, 64-QAM 802.11ac: BPSK, QPSK, 64-QAM, 256-QAM
Certifications
Radio	FCC Part 15C FCC Part 15E ETSI EN 300 328 EN 301 893 LP0002 EN 60601-1-2
EMC	FCC Part 15B EN 301 489-1 EN 301 489-17 EN55032 EN55024 EN61000-3-2/-3 BSMI CNS13438
Safety	EN 60950-1 IEC 60950-1 BSMI CNS14336-1
Physical Specifications and others
Item	Dimensions (WxDxH)(mm/in.) 211 x 223 x 39 / 8.31 x 8.78 x 1.54 Weight (g/lb.) 750/1.65
Packing	Dimensions (WxDxH)(mm/in.) 266 x 268 x 56/10.47 x 10.55 x 2.21 Weight (g/lb.) 1090/2.40
Included accessories	Wall/ceiling mount plate 12V 2A adapter (Optional) Mounting screws
Plenum rating	Yes
Kensington lock support	Yes
Power supply	Input: AC 100-240V, 50~60Hz Output: DC +12V 2A
MTBF (hr)	1,306,790
Environmental Specifications
Operating	Temperature -20°C to 50°C / -4°F to 122°F Humidity 10% to 90% (Non-condensing)
Storage	Temperature -40°C to 70°C / -40°F to 158°F Humidity 10% to 90%

ดาวน์โหลด

รีวิว

ยังไม่มีบทวิจารณ์

มาเป็นคนแรกที่วิจารณ์ “Zyxel NWA1123-AC HD”

You must be logged in to post a review.